آلة بيع أغطية الهواتف في محطات مترو الأنفاق: ما الذي تفعله آلة WM880؟

The WM880 is a phone case printing and vending machine built by Wider Matrix. A customer walks up, scans the QR code shown on the machine, picks a phone model, uploads a photo from their own phone, pays, and takes away a TPU+PC case with that photo printed on it. There is no counter, no staff member and no minimum order. That is the part that separates a subway station phone case vending machine from a phone accessory shop: it sells a single unit at a time, all day, with nobody standing behind it.

The numbers come first, because they decide whether a site can actually take the machine. It measures 1340 x 990 x 2170 mm, weighs 380 kg, draws 410W on a 110V to 220V supply, carries 2000 ml of ink, and holds between 1,020 and 1,025 phone cases depending on which print head version you order.

Buyers of this model are usually transit concession holders, mall and airport operators, phone accessory retailers adding a self-service line, importers reselling into their own market, and brands that want cases printed with a logo at the point of sale. If you are pricing one machine for a single station entrance, most people start with the F1080 version. If it will run from first train to last, the i1600 is where most operators end up.

Why stations suit this machine

A station gives you something a shop cannot. You get people who are already standing still with a phone in their hand, most of whom will be back tomorrow, and none of whom expect to be served by a person. The WM880 was designed around that buyer.

The physical fit is unglamorous but it matters. At 1340 mm wide it sits in a concourse without blocking the circulation route. It runs on 410W from a 110V to 220V supply, so it uses a normal circuit rather than a dedicated installation. At 380 kg it is heavy enough that you want to confirm the freight lift, door widths and floor level before delivery day, not on it. The 2000 ml ink reservoir means topping up ink is a scheduled visit rather than an emergency.

Restocking is a one-person job. You place the case flat with the back facing up, keep the stack under the red line indicator, and push it into the slot. With 1,020 to 1,025 cases on board, a single off-peak visit covers a busy concourse for a long stretch. The optional inventory identification module, a camera fitted on top of the machine for an extra US$200 / ¥1350, reports stock per slot in real time, so you find out a slot is empty before a passenger does by walking away.

Two things about station retail that operators tend to learn the hard way. The first is that the space is controlled by someone else, whether that is the transit authority, a station retail concessionaire or an advertising contractor. You need that agreement in place, and approvals usually require machine documentation. We supply specification sheets and copies of the certifications listed further down, but we cannot negotiate the concession for you. The second is that peak flow and machine access are different problems. Nobody restocks at 8 a.m. in a crowd, so plan refills and ink checks for the quiet hours and let the remote dashboard handle the rest of the day.

Stations with international traffic also get real use out of the multilingual interface, which covers English, Russian, French, Arabic, Korean and more, along with multi-currency settings. A traveller printing a photo from their trip onto a case is buying a souvenir, which is a different purchase from replacing a scratched case. Both work. For a wider look at which sites pay and which ones just look busy, the piece on phone case vending machine placement in high traffic locations goes through the numbers operators actually use.

WM880 specifications

How a customer buys a case

1. Scan the QR code shown on the machine screen.
2. Choose the phone model, for example iPhone 16, iPhone 15 or iPhone 11.
3. Upload the picture to be printed.
4. Pay by coin, cash, credit card, NFC or QR payment.

The machine then prints the case and dispenses it. Every step runs from the customer’s own phone, which is what allows the machine to sit unattended through a full service day. Payment is set to suit the market: transit crowds in most cities move cashless on card, NFC or QR, while coin and cash stay switched on where a site still needs them.

Which print head to order

Upgrades are lossless across the range: F1080 to i1600-U1 to i3200-U1HD. If you start on the base head and the site performs, you are not replacing a machine, you are replacing a head. From i1600 to i3200, that step is listed at +US$680 / ¥5000. There is a longer comparison in this مراجعة طابعة أغطية الهواتف WM880 ودليل المشتري if you want to weigh the three against each other before ordering.

For a station, my own preference is the i1600-U1. A concourse does not print at a steady rate, it prints in bursts around train arrivals, and speed matters more than a small saving on the machine price. The F1080 still produces a good photo and it is the cheaper entry point, so it makes sense for a low-volume site, a first test location, or an operator working to a tight opening budget. The i3200 is the one to order if you already know you are running several machines in the same district and want throughput headroom from day one.

What the WM880 costs

Tier pricing applies from 4 units upward, with published steps for 4 to 6 units, 7 to 10 units and 11 units or more. Those tiers come down as the order grows, and the exact figures depend on the mix of versions you take, so send us the quantity and we will quote the correct tier rather than a rounded one.

Two options sit on top of the base price. Inventory identification adds US$200 / ¥1350 and involves a camera module installed on top of the machine. A print head upgrade from i1600 to i3200 adds US$680 / ¥5000. Both can be ordered with the machine or later, which is worth knowing if you want to open a site quickly and add features once the location proves itself. If you want to see how machine price, options and consumables add up before you spend anything, this breakdown of what you actually pay for a phone case vending machine and what you get covers the whole picture.

Cases and ink: the running cost

The case is the cost that moves with volume: buy 8,000 at a time instead of 1,000 and the standard case drops from US$1.30 to US$1.10. Ink is the harder one to model, because how far a set stretches depends on the artwork customers upload, the print area and the print head in the machine. Ask us for a consumption estimate based on the version you are ordering before you put a margin on paper, and we will give you a straight figure instead of a range. For operators who prefer to see a full working example first, this cost breakdown for a phone case vending machine works through cases, ink and site costs together.

Cases are TPU and PC composite, and two lens protection designs are available. The structure is shaped for quick installation on the phone and faster loading into the machine, which sounds like a small thing until you are restocking 1,000 cases in a station back corridor.

Managing the machine from somewhere else

The mobile app and PC dashboard let you check equipment status, sales data and print records remotely. That matters more in a station than almost anywhere else, because you are not walking past the machine twice a day. Alarm and connectivity monitoring is the difference between hearing about a printer fault from your dashboard and hearing about it from a passenger who could not print anything.

Certification and what the factory controls

Wider Matrix holds 5 or more independent R&D patents, with KC, CE and PSE independent R&D patents among them, and more than 30 industry awards. The reason that matters to a buyer is narrower than a certificate wall: this is the company that builds the machine, supplies the cases and the UV hard ink, and supports the print head upgrade path afterwards. When a station machine stops printing at 6 p.m. on a Friday, one supplier picking up the phone is worth more than three suppliers pointing at each other. After-sales support runs 7×24 with manual response.

Where else these machines get installed

Stations are the sharpest fit, but the same machine goes into shopping malls, airports, exhibition centres and tourist districts, plus schools, campuses and office buildings where a self-service kiosk replaces a locked accessories cabinet. The common thread is foot traffic with time to spare and a phone already in hand. If you are still deciding on a venue, this article on where phone case vending machines near you are and how to find one is a useful reality check on the sites that keep working and the ones that quietly stall.

Get a WM880 quotation

Tell us four things and we can price your order properly: your country and port, how many machines you need, whether you want the F1080 or the i1600-U1, and where the machines are going (station concourse, mall, airport, campus). If the site is a station, add roughly how many passengers pass through and which phone models dominate in that market, and we will advise on case stock and the print head that fits the volume.

Leave your email address and requirements with our sales team and you will get back pricing at the right tier, the option costs that apply, lead time and shipping, plus a straight answer on anything the machine cannot do for your site. Numbers first, no obligation.